EXFO FIP-400 Fiber Inspection Probe and ConnectorMax - Manual (Page 11)

Introducing the FIP-400 Fiber Inspection Probe and ConnectorMax
Fiber Inspection Probe 5
USB Adapter (Optional)
USB Adapter (Optional)
The USB adapter is used to connect the probe to a computer not equipped
with a 8-pin connector. It allows you to view probe images on your
computer screen. You can also capture and store these images on your
computer to document your work.

The Capture button on the USB adapter serves the same function as
the capture button on the probe.

The Status LED on the USB adapter will be green when the probe, USB
adapter, and computer are connected and the software is running.
I
MPORTANT
The product supports USB 2.0 only. You cannot use it with USB 1.1.
Probe connector
USB connector
Capture button
Operation status LED