EXFO FIP-400 Fiber Inspection Probe and ConnectorMax - Manual (Page 21)

Setting up Your Fiber Inspection Probe and ConnectorMax
Fiber Inspection Probe 15
Selecting the Mode of Operation
Selecting the Mode of Operation
ConnectorMax can be used to inspect single-fiber (SF) and multiple-fiber
(MF) connectors. Depending on which mode of operation you select,
different options will be available.
Note: The multiple-fiber connector option is only available if you have purchased
this option.
Note: The mode of operation is kept in memory when you exit the application.
To select the mode of operation:
1. From the main window, click the
button.
OR
Select the Test Config. tab, then Select.
2. Select the connector type that suits your needs. The test configuration
selection window is automatically updated accordingly.