EXFO FIP-425B/435B Fiber Inspection Probe and ConnectorMax2 Mobile - Manual (Page 26)

Setting up Your Fiber Inspection Probe and ConnectorMax2 Mobile
18 FIP-400B
Setting up Autonaming
Setting up Autonaming
The autonaming feature is useful to make a relevant naming scheme for
your tests. This also ensures that you do not overwrite files by mistake. You
can select which item goes in the file name, as well as the type of separator
you want to use in between.
A preview is available to show you the final output of the file name.
In Live Video mode, the autonaming parameters can be set. You will only
see the parameters for the current and next capture (when the test is done
but not saved yet), or for the next capture only (test is not done yet).
Otherwise, the parameters will not be displayed.
In Capture and Archive modes, it is possible to change the name of the file
without changing the settings.