EXFO FIP-425B/435B Fiber Inspection Probe and ConnectorMax2 Mobile - Manual (Page 53)

Fiber Inspection Probe 45
4 Inspecting Fiber Ends
Viewing the fiber inspection is done using ConnectorMax2 Mobile. You can
start the application before or after connecting the probe, and the view
on-screen will be automatically updated.
Inspecting Fiber Ends
When you connect the FIP-400B Fiber Inspection Probe to your smart
device, you can view and inspect fiber ends right away. This direct viewing
mode is known as the Live Video mode.
Note: When the internal temperature of the FIP-435B is too low, the probe
performs a warm-up that can last up to a minute.
You can also capture images of your inspections to save them for future
analyses. This is known as the Capture mode.
A digital watermark is added to the images generated by the application.
W
ARNING
Never look directly into a live fiber. It could cause serious eye
damage. Always use your FIP-400B Fiber Inspection Probe.