EXFO FIP-425B/435B Fiber Inspection Probe and ConnectorMax2 Mobile - Manual (Page 73)

Fiber Inspection Probe 65
5 Maintenance
General Maintenance
To help ensure long, trouble-free operation:

Always inspect fiber-optic connectors before using them and clean
them if necessary.

Keep the unit free of dust.

Clean the unit casing with a cloth slightly dampened with water.

Store unit at room temperature in a clean and dry area. Keep the unit
out of direct sunlight.

Avoid high humidity or significant temperature fluctuations.

Avoid unnecessary shocks and vibrations.

If any liquids are spilled on or into the unit, turn off the power
immediately, disconnect from any external power source, remove the
batteries and let the unit dry completely.
Recycling and Disposal
(Applies to European Union Only)
For complete recycling/disposal information as per European Directive
WEEE 2012/19/UE, visit the EXFO Web site at
www.exfo.com/recycle .
W
ARNING
The use of controls, adjustments and procedures, namely for
operation and maintenance, other than those specified herein may
result in hazardous radiation exposure or impair the protection
provided by this unit.