Vf noise threshold settings – EXFO MaxTester 635 User Manual
Page 151
Noise Tests
Copper and VDSL2/ADSL2+ Multi-play Test Set
143
VF Noise
To select the parameter values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press
on a value to open a list box of options.
4. Press
to confirm the value.
VF Noise Threshold Settings
The Threshold Settings page allows you to set the
Threshold VF Noise values for the test.
Type is the threshold limit: either Maximum or
Minimum.
Enabled is a flag to use the current threshold:
either Yes or No.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and select
the options.
OR
3. Press
on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press
to confirm the value.