Wb psd noise threshold settings – EXFO MaxTester 635 User Manual
Page 163
Noise Tests
Copper and VDSL2/ADSL2+ Multi-play Test Set
155
WB PSD Noise
To select the parameter values in Portrait or Landscape modes:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view, select the options, or
increase/decrease values.
OR
3. Press
on a value to open a list box of options.
4. Press
to confirm the value.
WB PSD Noise Threshold Settings
The Threshold Settings page allows you to set the
RMS Noise Threshold parameters for the test.
Type is the threshold limit for each pair: either
Maximum or Minimum.
Enabled is a flag to use the current threshold:
either Yes or No.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and select
the options.
OR
3. Press
on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press
to confirm the value.