EXFO MaxTester 635 - Manual (Page 199)

Frequency Tests
Copper and VDSL2/ADSL2+ Multi-play Test Set 191
WB Attenuation
Result Details Cable Setup
The Cable Setup page in the Result Details allows
you to view the Cable Parameters set for the WB
Attenuation test.

Cable Type is the cable entry (with its associated
parameters) from the current Cable Book, used
for testing.

Cable Fill is the type of material the cable is filled
with: Aircore, Jelly, Pulp, 5 PR, or 2 PR.

Capacitance T-R/A-B is the value for the
capacitance per length constant.

Capacitance T/R to GND/A/B to E is the value for the capacitance per
length to ground constant.

Attenuation @ 300 kHz is the value for the reduction in signal strength
or insertion loss of the cable.

Velocity of Propagation is the velocity of propagation for the cable as
a ratio of the speed of light.

Resistance is the value for the resistance constant of the cable.

Cable Temperature is the temperature of the cable under test in either
degree C or F.