EXFO PPM-350C PON Power Meter - Manual (Page 12)

Safety Information 6
2 Safety Information
Laser Safety Information (Models with VFL)
Your instrument is a Class 3R laser product in compliance with standards
IEC 60825-1 and 21 CFR 1040.10. It is potentially harmful in direct intrabeam
viewing.
The following label(s) indicate that the product contains a Class 3R source:
The label is affixed at the back of your unit if the VFL option is present.
Electrical Safety Information
W
ARNING
The use of controls, adjustments and procedures other than those
specified herein may result in exposure to hazardous situations or
impair the protection provided by this unit.
W
ARNING
Do not install or terminate fibers while a laser source is active. Never
look directly into a live fiber and ensure that your eyes are protected
at all times.
I
MPORTANT
When you see the following symbol on your unit , make sure
that you refer to the instructions provided in your user
documentation. Ensure that you understand and meet the required
conditions before using your product.
W
ARNING
Use the AC adapter provided with this product
indoors only.
This product complies with 21 CFR 1040.10 and 1040.11 except
for deviations pursuant to Laser Notice No.50 dated 2001.
If VFL option is available
QST498C
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
IEC 60825-1:1993+A2:2001
21 CFR 1040.10
λ: 650 ±10 nm
Pout maximum < 5mW (into free space)