EXFO PPM-350C PON Power Meter - Manual (Page 28)

Managing Test Results 22
Deleting Data
You can delete unwanted data directly from the unit when viewing your stored data.
To delete data:
1. Press and hold down
for a few seconds to access the data recall menu.
2. Select the data you want to delete.
3. Press and hold down
for a few seconds once again.
4. The del CONF (delete confirm) message appears.
5. Press
to confirm your choice, or to cancel.
Transferring Data to a Computer
Using an appropriate USB cable and the Handheld Data Transfer software, you can
transfer saved data from your unit to a computer. This way, you can free memory
space, perform better analyses on your data and create reports.
To transfer data to a computer:
1. Using a USB cable, connect your unit to an available USB port of the computer.
2. Turn on both the computer and your handheld unit. Connect your unit to a
power outlet to ensure that your unit will remain on during the transfer.
3. On the computer, start the Handheld Data Transfer application and start the
operation.
The unit displays “REM” and temporarily deactivates the keyboard and auto-off.
Note: For details about setting up the software and transferring data, refer to
the Handheld Data Transfer online help.
I
MPORTANT
Transferred data is not automatically deleted from your unit.
Store/
Select
Store/
Select
Store/
Select