EXFO PPM-350C PON Power Meter - Manual (Page 23)

PPM-350C 17
To test in Pass/Fail or Normal mode:
1. Inspect your fibers and clean them properly if needed (see Cleaning and
Connecting Optical Fibers on page 11 for details).
2. Connect as shown:
3. Turn unit on.
4. If you want to test in Pass/Fail mode:

Ensure that LEDs are on. If not, press .

Ensure that the desired threshold set is selected (see Selecting a Threshold
Set on page 14).
Results are now available.
Test at the premises
Test jumper
ONT port
Test jumper
OLT/video port
Drop cable
Bulkhead connector
Test at the drop terminal
Test jumper
ONT port
Test jumper
OLT/video port
Bulkhead connector
Drop cable
ONT port
Test jumper
OLT/video port
Splitter’s output pigtail
Bulkhead connector
Test jumper
Test at the fiber distribution hub (FDH)
P/F
mode