EXFO FLS-2600B Tunable Laser Source - Manual (Page 111)

Remote Control
Tunable Laser Source 103
Specific Commands
SOURce:SWEep:STOP:WAVelength
Description This command allows you to specify a stop wavelength for the
sweep.
Syntax SOUR:SWE:STOP:WAV<wsp><wavelength>
Parameters The <wavelength> parameter indicates the wavelength in
9999.999 nm or 999.9999 THz format.
Example SOUR:SWE:STOP:WAV 1610.000
Note This command cannot be performed during a sweep.
If you do not specify a unit, the system will use the current
spectral unit (nm or THz). To specify the units you want to use
add NM or THZ after your query (e.g.,
SOUR:SWE:STOP:WAV<wsp><wavelength><wsp>NM).
See also SOUR:SWE:START:WAV, SOUR:SWE:START:WAV? and
SOUR:SWE:STOP:WAV?
SOURce:SWEep:STOP:WAVelength?
Description This query returns the stop wavelength for the sweep.
Syntax SOUR:SWE:STOP:WAV?
Response Wavelength in 9999.999 nm or 999.9999 THz format.
Note If you do not specify a unit, the system will return the value in
the current spectral units (nm or THz). To specify the units you
want to use, add NM or THZ after your query
(e.g., SOUR:SWE:STOP:WAV?<wsp>NM).
See also SOUR:SWE:START:WAV, SOUR:SWE:START:WAV? and
SOUR:SWE:STOP:WAV