D-Link WIRELESSADSLROUTER DSL-G604T - Manual (Page 28)

DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
VPI/VCI
If you are told to change the VPI or VCI values, type in the values given to you by
your service provider. Many users will be able to use the default settings.
Username &
Password Type the Username and Password used to verify the identity of your account.
Typically, the Username is an account number assigned by your ISP. See your ISP
for further information.
Connection Type Choose between PPPoE LLC, PPPoA LLC or PPPoE VC-Mux depending on the
instructions of your ISP.
Step 4: Set Wireless LAN Connection
To set the Wireless LAN connection, we need to
enable the Wireless LAN feature. Click on the
“Enable Wireless LAN” box then click Next. If
you do not want to setup a wireless connection at
this time click the Next button to go to Step 5 of
the Configuration Wizard.
Figure 3-7. Set Wireless Configuration window
28