D-Link WIRELESSADSLROUTER DSL-G604T - Manual (Page 36)

DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 4- 5. WAN Settings window for Static IP Address
This window holds the following fields for the user to configure.
Connection Type This field allows the user to choose the connection type used to connect your router
to your ISP. The user may choose between 1483 Bridged IP LLC, 1483 Bridged IP
VC-Mux, 1483 Routed IP LLC and 1483 Routed IP VC-Mux. The correct choice
should be told to you by your ISP.
IP Address Enter the IP address based on the information provided to you by your ISP.
Subnet Mask Enter the Subnet Mask based on the information provided to you by your ISP.
Gateway Address Enter the Default Gateway based on the information provided to you by your ISP.
Primary DNS
Address This entry is for the IP address of your primary domain name server, which should
also be provided to you by your ISP. The router will first try the Primary DNS
Address to resolve a website’s URL IP address. If this IP address fails, the router
will then try the Secondary DNS Address.
Secondary DNS
Address The IP address of the secondary domain name server will be used to resolve a
website’s URL IP address if the Primary DNS Address fails. The information in this
field should also be provided by your ISP.
MTU The Maximum Transmission Unit (MTU) is a link layer restriction on the maximum
number of bytes of data in a single transmission. The default size is 1400 bytes per
packet.
36