D-Link WIRELESSADSLROUTER DSL-G604T - Manual (Page 29)

DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Step 4-1: Set Wireless LAN Connection
To configure the Wireless LAN Connection, enter
the SSID and the Channel number to be used for
the Wireless LAN. The SSID can be changed to
suit your wireless network. Remember that any
wireless device using the access point must have
the same SSID and use the same channel. The
SSID must be a continuous character string (i.e.
no spaces) of up to 16 characters in length. The
Channel may be changed to channels that are
available in your region. Channels available for
Wireless LAN communication are subject to
regional and national regulation. It is
recommended to setup some form of security in
order to keep your network safe from unwanted
connections. We advise that you use a minimum
of 64/128 bit WEP. Click Next to go to step 5 of
the Configuration Wizard.
Figure 3-8. Set Wireless Configuration window
Step 5: Setup Completed
In the following window, you must restart the
system to save the settings implemented or go
back to choose another option to configure.
Figure 3-9. Setup Completed window
29