D-Link WIRELESSADSLROUTER DSL-G604T - Manual (Page 45)

DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
5
Advanced Configuration
The Advanced tab has fifteen windows for you to view and configure: UPnP, Virtual Server, LAN
Clients, SNMP, Filters, Bridge Filters, Routing, DMZ, Firewall, RIP, PPP, ADSL, ATM VCC,
Wireless Management, and Wireless Performance.
UPnP
UPnP supports zero-configuration networking and automatic discovery for many types of networked
devices. When enabled, it allows other devices that support UPnP to dynamically join a network,
obtain an IP address, convey its capabilities, and learn about the presence and capabilities of other
devices. DHCP and DNS service can also be used if available on the network. UPnP also allows
supported devices to leave a network automatically without adverse effects to the device or other
devices on the network. UPnP can be supported by diverse networking media including Ethernet,
Firewall, phone line and power line networking.
Figure 5- 1. UPnP window
To enable UPnP for any available connection, click to check the Enable UPnP selection box, select
the connection or connections on which you will enable UPnP listed under Available Connections
and click the Apply button.
45