D-Link WIRELESSADSLROUTER DSL-G604T User Manual
Page 51
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 5- 7. Routing window
The user may configure the following fields for Static routing on the router:
Destination
Enter the host IP address or the remote network that will be used for static routing on
the router.
Netmask
Enter the Subnet Mask to be used for static routing.
Gateway
Enter the gateway device’s IP address. This is an IP address of a device that will
allow the user to contact the remote network or Host IP address. This field cannot be
configured or used if the following field, Connection, has been selected.
Connection
Choose a PVC from the corresponding pull-down menu to be used for static routing.
This field cannot be configured or used if the previous field, Gateway, has been
selected.
Click Apply to set the routing information configured.
DMZ
Firewalls may conflict with certain interactive applications such as video conferencing or playing
Internet video games. For these applications, a firewall bypass can be set up using a DMZ IP address.
The DMZ IP address is a “visible” address and does NOT benefit from the full protection of the
firewall function. Therefore it is advisable that other security precautions be enabled to protect the
other computers and devices on the LAN. It may be wise to use isolate the device with the DMZ IP
address from the rest of the LAN. For example, if you want to use video conferencing and still use a
firewall, you can use the DMZ IP address function. In this case, you must have a PC or server through
which video conferencing will take place. The IP address of this PC or server will then be the DMZ IP
address. You can designate the server’s IP address as the DMZ by typing in the IP address in the IP
Address space provided and then enabling its status by clicking the Enabled radio button and then
click Apply. For the system that uses the DMZ IP address, you may want to manually assign an IP
address to it and adjust your DHCP server addresses so that the DMZ IP address is not included in the
51