EXFO IQS-600 Integrated Qualification System - Manual (Page 102)

Using the IQS Manager Interface
94 IQS-600
Accessing Current Modules
The name, current status and serial number of each module installed on
the unit you have selected in the system tree appear besides the module’s
icon.

A green icon means that the module is ready for you to use.

A yellow icon means that your module is in use.

If the icon bears a question mark, your controller or expansion unit
does not recognize the module you have installed.
The function buttons section allows you to perform s tasks on the modules
currently in your system such as starting a single-module application.
Status Bar
The status bar, located at the bottom of the main window, identifies the
operational status of the IQS-600 Integrated Qualification System.
For more information about automating or remotely controlling the IQS-600
Integrated Qualification System, see the corresponding sections in this user
guide.
Current date and time Module/unit status
Local: Module controlled locally only.
Remote: Module controlled remotely, but
local commands can also be used.
Lockout: Module controlled remotely only.
Control mode