EXFO IQS-600 Integrated Qualification System - Manual (Page 60)

Setting Up Your Integrated Qualification System
52 IQS-600
Installing an External Monitor
To calibrate your touchscreen:
1. Start Windows.
2. On the taskbar, click Start and then select
All Programs > UPDD > Calibrate.
3. Follow the calibration procedure described on the corresponding tab.
Installing an External Monitor
A controller unit can be connected to an external monitor. Connect your
monitor to the standard computer connector located at the back of the
unit.
Note: Use the Windows Control Panel to configure the display settings of your
external monitor.
Note: You cannot set the screen resolution to 800 x 600 using the Windows screen
resolution utility. You must use the Intel GMA driver utility in the Windows
Control Panel to change it to that specific setting.
Monitor port