EXFO IQS-600 Integrated Qualification System - Manual (Page 46)

Getting Started with Your Integrated Qualification System
38 IQS-600
Turning the Integrated Qualification System On and Off
Turning the Integrated Qualification System
On and Off
To turn your controller or expansion unit on, use the button located on the
lower left-hand part at the front of the unit. To ensure that your IQS-600
controller unit detects the expansion units, use a proper starting sequence.
First turn on the expansion units, and then turn on your IQS-600 controller
unit. Failure to use proper starting sequence may lead to malfunction.
Note: If you have more than one expansion units linked together, the order in
which you turn them on does not matter.
Ensure to turn on the main power switch located at the back of each unit.
C
AUTION
If the controller unit is stored at a temperature outside of the
specified operating temperature range, let the controller unit reach
operating temperature before turning it on.
On Off