Glow-worm Clearly Solar Vertical In-Roof Collector - Manual (Page 29)

29
Diagram 7.20
14966
7.6 Flexible protection
NOTE: Ensure that the adhesive surface is dry and free from
dust and grease.
Remove the protection film from the adhesive surface of the
flexible protection.
Contour the flexible protection to the tile shape, see diagram
7.20.
Stick the flexible protection to parts that overlap.
7.7 Sealing strip
Attach the self adhesive sealing strip on the side sections of
the collector frame as shown in diagram 7.21 and also on the
ridge plates, see diagram 7.22.
If necessary carefully cut the sealing strip with a trimming knife.
14968
OVERLAP
FLEXIBLE
PROTECTION
14968
Diagram 7.21
Diagram 7.22
SEALING
STRIP
SEALING STRIP
7 One Collector Extension Kit - 22 0 - 75 0