Glow-worm Clearly Solar Vertical In-Roof Collector - Manual (Page 34)

34
Diagram 8.13
15141 RIDGE
PLATE
8.2 Ridge plate
Slide the ridge plate on both collectors.
Make sure that the ridge plate is above the side sections and
slides in the corresponding rail ( A), see diagram 8.13.
8.3 Riveting the frame
Drill a 4.5 mm diameter hole through the ridge plates on the
marks on the left and right hand respectively, see diagram
8.14.
Rivet the ridge plate to the side section.
8 Two Collector Flashing Kit - 15 0 - 22 0
Diagram 8.14
15142
4,5
A