Installation, 5 installation location, 6 climapro – Glow-worm Climapro2 RF User Manual

Page 7: Rf installation

Advertising
background image

0020094586_01 - 08/10 - Glow-worm

- 5 -

INSTALLATION

INSTALLATION

5 Installation location

5.1

Room thermostat

• Explain the following requirements to the user.
Install the Climapro

2

Rf:

- in a room protected from frost,
- on an interior wall of the main room in the home,
- at approximately 1.50 metres from the floor (according to the

regulations in force).

Do not install the Climapro

2

Rf:

- Near sources of heat, such as radiators, chimney walls,

televisions or solar radiation,

- above a cooker that is likely to give off steam and grease,

- on cold walls,

- between units or behind curtains or other objects that might

disturb temperature recording for the ambient air in the room,

- in a room that is heavily loaded with dust or where the

atmosphere is corrosive,

- near air currents that may come from doors or windows.

5.2

Radio receiver

Not all appliances have a location for holding the

radio receiver. In this case, the radio receiver can be

fixed to the wall.

Inside the appliance:

• Install the radio receiver in the appliance in the location

provided (see the appliance installation manual).

Outside the appliance:

• Install the radio receiver near the appliance at approximately

1.8 metres from the ground.

• Keep the radio receiver away from all metallic parts (cables,

electrical circuit boxes, metal walls) so as not to disturb the

radio transmission.

1500

6 Climapro

2

Rf Installation

All of the measurements in this chapter are expressed in mm.

6.1

Dimensions

6.1.1

Room thermostat

62.5

34

6

173

Advertising