Glow-worm Compact 80E - Manual (Page 26)

26 221742D
BURNER
RETAINING
BRACKET
Pull bracket
forward to
remove
SECURING
LIP
RIGHT HAND SIDE OF BURNER
LEFT HAND SIDE OF BURNER
Pull burner
forward to
remove
BURNER
GUIDE
12 Servicing
6963
Diagram 12.4
6962
Diagram 12.5
12.3 Cleaning Main Burner
Use a vacuum cleaner or suitable brush to clean the burner
thoroughly, making sure that all burner ports are clear and
unobstructed.
Do not use a brush with metallic bristles.
12.4 Service Checks
Inspect the spark and sensing electrodes, Clean or renew if
necessary, refer to Sections 14.4 and 14.5.
Check the main injector, cleaning or renewing as necessary,
refer to Section 14.3.
Diagram 12.1
7648
BURNER
SECURING
SCREW (3)
LEADS (3)
SENSING
ELECTRODE
SILICONE
SLEEVE (3)
IGNITION
ELECTRODE IGNITION
ELECTRODE
Diagram 12.2
7306
Diagram 12.3
7307
Before replacing any of the parts removed during servicing,
inspect the condition of all seals and joints, renewing them as
necessary.
Check the condition of the combustion chamber insulation.
If renewing, refer to Section 4.27.
SECURING SCREW
AIR PRESSURE
TUBE (2)
ELECTRICAL CONNECTIONS
FAN
FAN
FLUE
COLLECTOR
When refitting
make sure the
burner is located
in the burner guide
and fitted properly.
When refitting
make sure the
bracket is located
in the guide
and fitted properly.
GUIDE