Glow-worm Ultrapower sxi - Manual (Page 13)

0020054593 - 03/11 - Glow-worm - 13 -
HOW TO USE YOUR APPLIANCE
8.3 User Controls
If you are in any doubt about
the boiler being filled with
water contact your installer
or Glow-worm's own service
organisation using the
telephone number shown in
the chapter " Contact your
after-sales organisation".
• Press "MODE" button and scroll
through your options to select one of
the following:-
• Timed central heating and domestic hot
water .
• Constant central heating with timed
domestic hot water.
• Timed domestic hot water only.
• Boiler functions ALL switched off.
OFF
• Turn ON your external controls and
select the room temperature required
• The boiler will operate automatically.
• NOTE: The display will indicate the
Heating system pressure in bar or:
• Water temperature, when heating is on.
• Domestic Hot Water temperature
setpoint, when there is a demand.
• Fault Code (see section Fault Finding).
• The control panel will flash and display
all its digits. It will then return to the
default display and depending on the
selected operation and controls, display
the temperature settings.