Glow-worm Ultrapower sxi - Manual (Page 14)

0020054593 - 03/11 - Glow-worm - 14 -
HOW TO USE YOUR APPLIANCE
Adjusting temperature
• Domestic hot water has priority over
central heating. The temperature is
factory preset to the minimum 40°C, but
can be adjusted to a maximum of 62°C
as required.
• The "ECO" setting of 50°C is
recommended and ideally suited to
normal family use.
• The Central Heating temperature is
factory preset to the minimum 38°C, but
can be adjusted to a maximum of 82°C
as required.
OFF
STEP 1
STEP 2
Press the "+ or -" once
the current temperature
will be displayed "flashing".
Press "+ or -" to
increase or decrease the temperature.
The temperature setting will
automatically save after 5 seconds.
OFF
Press the "+ or -" once
the current temperature
will be displayed "flashing".
STEP 1
STEP 2
Press "+ or -" to
increase or decrease the temperature.
The temperature setting will
automatically save after 5 seconds.