GoDEX EZ1105 series - Manual (Page 21)

EZ1105 / EZ1305 User Manual
17
7. Remove the two hex screws on the
left and right of the RS-232 module
(serial port).
8. Push the RS232 module through the
opening of the RS232 bracket
supplied.
9. Secure the RS-232 module using the
hex screws you removed earlier.
10. Now plug the other end of the
connection cable into the
motherboard socket.
11. Return the motherboard to its original
position (before the installation).
Please make sure that the screw holes
are not covered by cables or the
motherboard.
12. Replace the bottom part of the
printer housing as shown in the
illustration.
13. Secure the printer housing using the
three screws you removed earlier.