GoDEX EZ1105 series - Manual (Page 23)

EZ1105 / EZ1305 User Manual
19
5. Secure the motherboard back
panel supplied with the printer using
the back panel fastening screw and
the earthing screw.
6. Using the male hex spacer, secure
the female hex spacer on the
motherboard in the position shown.
7. Align the Ethernet module with the
new motherboard back panel as
shown in the illustration.
8. Secure the Ethernet module on the
motherboard using the fastening
screw.
9. Plug one end of the connection
cable into the motherboard and the
other end into the Ethernet module.