GoDEX EZ1105 series - Manual (Page 25)

EZ1105 / EZ1305 User Manual
21
5. Maintenance and adjustment
5-1. Cleaning the print head
Dust or dirt on the print head may
result in inadequate print quality. The
printer cover should therefore
always be closed during printing.
Please also make sure that there is
no dust or dirt on the print medium
you wish to use, to ensure a good
print quality and print head
performance.
Here is how you clean the print
head:
1. Switch off the printer.
2. Open the printer cover.
3. Release the print mechanism
and lift it.
4. Remove the ribbon.
5. To remove any label residue or
other dirt from the print head
(see blue arrow), please use a
soft lint-free cloth dipped in
alcohol.
【 Note 1 】
The print head should be cleaned
once a week.
【 Note 2 】
Please make sure that there are no
metal fragments or other hard
particles on the soft cloth used to
clean the print head.
5-2. Adjusting the print head pressure
If you use a variety of label stocks or
ribbon types, the print quality may
suffer. You will then need to adjust
the print head pressure.
1. Open the printer cover.
2. Remove the ribbon.
3. Use a screw driver and gently
turn
the adjustment screws for the
print head to increase or
reduce the print head pressure.
+
- + -