GoDEX Ethernet Control Center - Manual (Page 22)

Software Operation Manual 20
4-2-2. Setting up Server Configuration
To set up the Server configuration, the system will request user to enter administrator (default: admin) and
password (default: admin) to login.
User Accounts: You can change administrator name and password or add a user account for print
server. If you forgot administrator name and password, you must perform Restore Factory Default action.
Please refer to the chapter “Restore Factory Defaults”.
Set Administrator
New Administrator: enter your desired administrator name.
New Password: enter your desired password.
Retype Password: confirm your previous password typing.
User Accounts list
User name: add a new user account for accessing the storage attached to the Server.
Password: set a password for added user.
Add: click Add button, after entering the user name and corresponding password. The account will
take effect once shown in the blank below.
Delete: delete the existing user account.
Configuration
TCP/IP: You have to set the Server’s TCP/IP configuration to connect TCP/IP network. Please see
the chapter of Network Configuration for more details.
WLAN: Set or change the WLAN configurations. Please see the "Set Wireless Configuration Using
Server’s Web Pages" section of Network Configuration chapter for more details.
Printer Configuration: Set or change the configurations of printer. Please refer to printer's operation
manual check the function of each setting item.