GoDEX Ethernet Control Center - Manual (Page 8)

Software Operation Manual 6
3. Network Configuration
3-1. Setting up Local Windows Printer Driver
You are advised to install your Windows printer driver in advance. For most printers, you can install the
printer drivers with the following procedure:
1. Click Start, click Control Panel, click Printers and Other Hardware, and then click Printers and Faxes.
2. Double click Add Printer to start the Add Printer Wizard, and then click Next.
3. Click Local printer, clear the Automatically detect and install my Plug-n-Play printer check box to avoid
having to wait for the completion of another printer search, and then click Next. If you leave this option
selected, Windows will attempt to find the printer itself and figure out what kind it is. If Windows does not
find the printer, the wizard will continue as described in this task.
4. Select a Windows driver for your printer. Click Next.
5. Choose whether you want to share the printer with other network users. Do you want to print a test page?
Select the appropriate radio button and click Next and Finish.
3-2. Connecting the Hardware
1. Turn off the printer.
2. Connect the Ethernet module to the network with a twisted-pair category 5 cable, 10baseT or
100baseTX.
3. Turn on the printer and make sure it is ready for use.
* Note: If you need to connect the printer via LPR protocol, please go to Windows printer setting page and go
to "Ports" setting. Select TCP/IP port from ports list and click "Configure Port".