GoDEX Ethernet Control Center - Manual (Page 25)

Software Operation Manual 23
Maintenance
If you want to restore factory default values of the Server and upgrade new firmware of Ethernet/Wireless
LAN or printer, you can use the Maintenance tool:
Printer Firmware Upgrade: click Open to find the firmware file to be upgraded. Click Upload to
upload the firmware into the printer.
Server Factory Default: click this button, the Server will restore factory default values.
Server Firmware Upgrade: click Open to find the firmware file to be upgraded. Click Upload to
upload the firmware into the Server.
Restart Server: click this button, the Server will restart.