GoDEX Ethernet Control Center - Manual (Page 31)

Software Operation Manual 29
7. Upgrade Server Firmware
＊ Note: Failure of server firmware loading or upgrading may cause damage to the Ethernet/Wireless LAN
module. Please follow below procedures for loading and upgrading firmware, or please seek help from your
network administrator.
This chapter describes how to upgrade firmware. Please follow the following procedure:
1. Power on the Server. Suppose that the Server is in DHCP mode.
2. Check the Server's IP address.
3. First, run Control Center. It will automatically search for Servers on the LAN. Then Servers’ IP addresses
will be shown in Control Center.
4. Run any Web browser, like Microsoft Internet Explorer. Go to “http://Server’s IP address“ to access the
Server's home page.
5. Click Login at the top of the menu.
6. Login the Server with Administrator (default: admin) and Password (default: admin).
7. Click Maintenance.
8. Click Server Firmware Upgrade.
9. Click Browse button to choose the file of new firmware.
10. Click Upload button to start firmware upgrade.
11. Wait for 15 seconds for system reboot.