GoDEX GS550 - Manual (Page 61)

6 - 3
Codabar
<Default All Codabar Settings>
Codabar On/Off
* On
Off
Codabar Start / Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code.
You may either transmit, or not transmit Start/Stop characters.
Default =
Don’t Transmit.
Transmit
Codabar Check Character
* Don’t Transmit
Codabar check characters are created using different
“modulos.” You can
program the scanner to read only Codabar bar codes with Modulo 16 check
characters. Default = No Check Character.
No Check Character indicates that the scanner reads and transmits bar
code data with or without a check character.
When Check Character is set to Validate and Transmit, the scanner will
only read Codabar bar codes printed with a check character, and will trans-
mit this character at the end of the scanned data.