Upc-e0 check digit, Upc-e0 number system, Upc-e0 addenda – GoDEX GS550 User Manual

Page 84

Advertising
background image

6 - 26

UPC-E0 Check Digit

Check Digit specifies whether the check digit should be transmitted at the
end of the scanned data or not. Default = On.


* On

Off

UPC-E0 Number System

The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will
not transmit it. To prevent transmission, scan Off. Default = On.



* On

Off

UPC-E0 Addenda

This selection adds 2 or 5 digits to the end of all scanned UPC-E data.
Default = Off for both 2 Digit and 5 Digit Addenda.



2 Digit Addenda On

* 2 Digit Addenda Off

5 Digit Addenda On

* 5 Digit Addenda Off

Advertising