GoDEX GS550 - Manual (Page 90)

6 - 32
MSI
MSI On/Off
<Default All MSI Settings>
On
* Off
MSI Check Character
Different types of check characters are used with MSI bar codes. You can
program the scanner to read MSI bar codes with Type 10 check charac-
ters. Default = Validate Type 10, but
Don’t Transmit.
When Check Character is set to Validate Type 10/11 and Transmit, the
scanner will only read MSI bar codes printed with the specified type check
character(s), and will transmit the character(s) at the end of the scanned
data.