Lighting instructions – Golden Blount CSA User Manual

Page 6

Advertising
background image

3.Wait five (5) minutes to clear out any gas. If you
then smell gas, STOP! Follow “B” in the safety
information on page 5. If you don’t smell gas, go to
the next step.
4.Find Pilot - follow metal tube
from gas control. The pilot is
located on right side of burner
pan.
5.Turn knob on gas control coun-
terclockwise

to “PILOT.”

6.Push in control knob all the way and hold in.
Immediately light the pilot with a match. Continue
to hold the control knob in for approximately one
(1) minute after the pilot is lit. Release knob and it
will pop back out. Pilot should remain lit. If it goes
out, repeat step 6.

*If knob does not pop out when released,

stop and immediately call your service tech-
nician or gas supplier.

*If the pilot will not stay lit after several

tries, turn the gas control knob to “OFF” and
call your service technician or gas supplier.

7.Turn gas control knob counterclockwise

to

“ON.”
8.Periodically check the pilot flame for proper
flame pattern.

LIGHTING INSTRUCTIONS

1.STOP! Read the safety information on page 5.
2.Push in gas control knob slightly and turn clock-
wise

to “OFF” NOTE: The knob cannot be

turned from “PILOT” to “OFF” unless the knob is
pushed in slightly. Do not force.

TO TURN OFF THE GAS LOG SET:
1. From the “ON” position, turn control knob clockwise

to the “PILOT” position. The log set

will extinguish and the pilot will remain lit.

2. If complete shutdown is desired, from the “PILOT” position, push in the control knob slightly and

turn clockwise

to the “OFF” position. Do not force the knob.

LIMITED WARRANTY

Golden Blount Gas Logs are warranted against defective materials and/or workmanship for as
long as you own them. Burner pan assemblies are guaranteed for five years from date of
purchase. Safety Pilot Assemblies are covered for one year.

This warranty does not cover parts subjected to misuse, abuse, improper handling or improper
installation. The GB warranty specifically excludes any liability for indirect, incidental or conse-
quential damage to property.

Defective logs or defective parts should be returned to your dealer or to the factory prepaid with
a copy of your sales receipt. Defective parts will be repaired or replaced at the factory’s option
and returned to you prepaid.

GOLDEN BLOUNT - 4200 WESTGROVE DRIVE - ADDISON, TX 75001

1) LIGHTING - turn knob to “OFF”

and

wait 5 minutes before lighting.

3) Turn knob to “ON”

to light burner.

4) Use “OFF”

only

when complete shut-
down is necessary

PILOT

ON

OFF

2) Turn Dial to “PILOT”

position. With match

ready press knob in and
hold for 60 seconds while
lighting pilot.

Heat Shield

Advertising