Hanna Instruments HI 98180 - Manual (Page 33)

33
S E T U P S E T U P S E T U P S E T U P S E T U P
Setup mode allows viewing and modifying the measurement parameters.
These are general SETUP parameters for all the ranges and range specific
parameters.
The following table lists the general SETUP parameters, their valid range and
the factory default settings.
New Description Valid value Default
Backlight Backlight level 0 to 8 4
Contrast Contrast level 0 to 20 10
Auto Light Off Time until backlight 1, 5, 10, 30 min 1
is ON
Auto Power Off Time after the instrument Disabled 30
is powered OFF 5, 10, 30, 60 min
Date/Time 01.01.2006 to 12.31.2009 current
00:00 to 23:59 date/time
Time Format AM/PM or 24 hours 24 hours
Date Format DD/MM/YYYY YYYY/MM/DD
MM/DD/YYYY
YYYY/MM/DD
YYYY-MM-DD
Mon DD, YYYY
DD-Mon-YYYY
YYYY-Mon-DD
Language Message display language Up to four English
languages
Temperature (not for HI 98180) ºC or ºF ºC
unit
Beep ON
Beeper Status Enabled or Disabled Disabled
Instrument ID Instrument identification 0000 to 9999 0000
Baud Rate Serial Communication 600, 1200, 1800, 9600 9600
Meter Displays general
information informations