Hanna Instruments HI 98180 - Manual (Page 43)

43
ISE probe
Focus on the ISE probe item.
Press Custom in order to set the parameters for a custom probe.
Press Standard in order to select one probe from the standard probes list.
If Custom is pressed:
Use ARROW keys to focus on the parameter to be changed (“Change Slope”
or “Molar Weight”).
Focus on Change Slope item.
Use ARROW keys in order to select the desired combination.
If None/-59.16 is selected the slope of the probe can be changed by pressing
Modify key.
Press Modify.
Use ARROW keys to change the slope.
Press Accept to confirm or ESC to exit.