Hanna Instruments HI 9017 - Manual (Page 28)

28
OFF ON
ins rum n s
CON
RANGE
+/-
CAL
TEMP
ENTER
A
ENTER
B
CLEAR
7 8 9
4 5 6
1 2 3
0 . PGM
PROGRAMS OF HI9017 PROGRAMS OF HI9017 PROGRAMS OF HI9017 PROGRAMS OF HI9017 PROGRAMS OF HI9017
There are all together 6 programs in the instrument. To select a
particular program, press the program number on the numeric key-
board followed by the PGM key.
E.g. To select program 1
• press 1
• press PGM
At this stage, the left display shows "Px - y" (where
x refers to program number that you had pressed
and y refers to ENTER A or ENTER B). The right
display always shows the measured value of pH or
mV depending on the selected range.
Whenever a numeric value is entered, the entry
appears on the left display. There will be a long
beep after either ENTER A or ENTER B is pressed,
when the entered value is either wrong or not
acceptable by the particular program.
1 PGM
pH
ENTER
B
ENTER
A