Hanna Instruments HI 9017 - Manual (Page 44)

44
PROGRAM #8 (HI9318)
This program prints out the ion con-
centration in M for the pH value
measured.
To activate the program, press the 8
key and then the PGM key.
Note: Make sure the meter is in pH mode, otherwise a long beep will
be heard.
PROGRAM #9 (HI9318)
For more details see "Interface with computer" section on page 46.
Press the 9 key and then the PGM
key.
Enter the ASCII Code of the desired
prefix character and then press the
A key.
E.g. 64
8 PGM
PROGRAM 8
3.88 pH--
0.132 mM H+
PROGRAM 9
A enter ASCII
code for escape
character
9 PGM
A 6 4
Escape character
64