Hanna Instruments HI 9017 - Manual (Page 37)

37
PROGRAM 1
A set sample no.
B set time
C set date
Sample number
200
The following section explains how each of the HI 9318's logging
programs work.
Each program has up to 3 functions defined by the A, B and C key.
For program #4, #5 and #6 only, you can log pH or mV values
depending on the RANGE key selection.
PROGRAM #1 (HI9318)
This program allows the user to set sample number, time and date.
Values entered into program 1 are kept in memory even when pro-
grams 2 to 9 are used.
To enter program 1:
1) Push the 1 key and then the PGM
key. The printer will then define
the three functions:
A is the sample num-
ber,
B is time,
C is the date.
2) To set the sample number (A) choose any number from 1 to 999.
Push the desired number followed by the A key and the printer
prints the value.
Samples after 999 will be reset to zero and the sample number
will automatically advance from 0 to 999 in increments of 1, each
time the instrument logs and/or prints a reading.
E.g. sample number 200
1 PGM
PROGRAM 1
A set sample no.
B set time
C set date
A 2 0. 0
PROGRAMMING PROGRAMMING PROGRAMMING PROGRAMMING PROGRAMMING
LOGGER FUNCTIONS OF HI9318 LOGGER FUNCTIONS OF HI9318 LOGGER FUNCTIONS OF HI9318 LOGGER FUNCTIONS OF HI9318 LOGGER FUNCTIONS OF HI9318