Hatteland Display 23 inch - JH 23T14 MMD - Manual (Page 12)

12
Product Labeling
IND100077-138
Label Locations
Number ID and coloring based on “Label Size and Types“ table from previous page. All illustrations below is seen
from rear (and side where needed) with connectors facing down. Actual labels regarding its size and text orientation
vs product size is drawn in. Due to space restrictions on selected units, some labels will be rotated 90 degrees to fit
properly. The arrangement of labels may be shifted/stacked differently as it is based on factory options, such as; Touch
Screen, but they will be grouped together where possible.
Label Positions Notes Applies for Product Range
Warranty label covers screw
and are bent over edge onto
terminal connector plate (due
to space restrictions). Labels
placed on rear.
JH 15T17 MMD-xxx-Axxx
Warranty label covers screw.
Labels placed on rear.
JH 19T14 MMD-xxx-Sxxx
(Slim frame)
Warranty label covers screw.
Labels placed on rear.
JH 19T14 MMD-xxx-Axxx
Warranty label covers screw.
Labels placed on rear.
JH 20T17 MMD-xxx-Axxx