Hatteland Display 23 inch - JH 23T14 MMD - Manual (Page 6)

6
IND100131-16
Contents of package
Item Description Illustration
HA-SDM-2M
1 pcs of Standard DVI Signal Cable.
DVI-D 18+1P Male to DVI-D 18+1P Male Single Link - Length 2.0m
HA-VGA-2M-32
1 pcs of Standard VGA Signal Cable.
DSUB 15P Male to DSUB 15P Male - Length 2.0m
FS-CABLE EU
1 pcs of power cable European Type F “Schuko” to IEC.
Length 1.8m
Note: Included in package for models with AC input.
EUR TYPE F
IEC
80099
1 pcs of power cable US Type B plug to IEC.
Length 1.8m
Note: Included in package for models with AC input.
US TYPE B
IEC
VSD100692-1 or
VSD100692-4
1 pcs of Standard 160p Multifunction Cable #1 - Length: 30cm
Connectors from the 160pin (male) are:
- 3 x BNC Video IN (female) (certain deliveries only)
- 1 x 9p D-SUB (female) RS-232 COM I/O
Note:
This cable is only included with a product WITHOUT factory mounted touchscreen.
DVI-4
1 pcs of DVI > RGB/VGA adapter
DVI 12+5P Male to DSUB 15P Female
FCE17-E2W2SS-2NO &
L17DPPK09JSU (cover)
1 pcs of DC Power Input housing with internal cable screw terminal.
Note: Included in package for models with DC input.
MEDIA STD01
Documentation and Driver DVD/CD containing the user manual, including the Touch
Screen driver for units delivered with a factory mounted touch screen.
Menu and Driver
browser for
Microsoft® Windows®
1P06025 (screw) &
16M06012150 (washer)
4 pcs of M6X25 pan screws.
Suitable for securing the display unit into a console cut-out. See illustration to the
right.
DO NOT USE THESE TO MOUNT BRACKETS ONTO THE UNIT.
Use the provided and dedicated screws for accessories (see next table below)
Item Description Illustration
VSD100692-3
1 pcs of Standard Multifunction Cable #2 - Length: 30cm
Connectors from the 160pin (male) are:
- 3 x BNC Video IN (female)
- 1 x 9p D-SUB (female) RS-232 COM I/O
- 1 x 9p D-SUB (female) TOUCH COM I/O
Note: This cable is only included with a product with factory mounted touchscreen.
EK131.2
1 pcs of Standard RS-232 Serial Extension Cable DB9M-DB9F - Length: 200cm
Note: This cable is only included with a product with factory mounted touchscreen.
4 pcs of M6X12 Unbraco bolts. These are included with mounting bracket, if ordered
(review technical drawings chapter).
Should only be used to secure the bracket onto display.
If you prefer your own bolts, make sure they do not exceed 12mm in length. Use any
longer is not possible due to mechanical limits.
Package may also include: