Hatteland Display 23 inch - JH 23T14 MMD - Manual (Page 55)

55
IND100129-158
All specifications are subject to change without prior notice!
Specifications - JH 15T17 MMD-xxx-Axxx (LED version)
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
2/2
Available factory standard cables, 30cm [11.81"] in length.
• VSD100692-1 : 1 x 9P D-SUB (female) - RS-232 (COM1)
• VSD100692-3 : 1 x 9P D-SUB (female) - RS-232 (COM1)
: 1 x 9P D-SUB (female) - RS-232 (COM Touch Screen)
: 3 x BNC (female) (Composite Video in)
• VSD100692-4 : 1 x 9P D-SUB (female) - RS-232 (COM1)
: 3 x BNC (female) (Composite Video in)
Customized cables are possible to support more built-in signals, like: RS-485, RS-422/
RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls,
Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths
can be manufactured.
Sync Signal:
• Digital separate synchronisation
• Composite synchronisation
• Synchronisation on green.
• Auto detects VGA -> WUXGA, interlaced and non interlaced
• Video Signal : Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronisation Range:
• Horizontal : 15,0 kHz to 91,1 kHz
• Vertical : 60 Hz* to 85 Hz
* Recommended for optimum picture quality
• 412.00 (W) x 345.00 (H) x 73.00 (D) mm
• 16.22" (W) x 13.58" (H) x 2.87" (D) inch
• Weight: 7 kg (approx)
• Cables = VSD100692-3, VSD100692-4 or customized cables.
• JH 15TBR STD-B1 = Mounting Bracket (See user manual)
• JH 15TRO STD-A1 = Rotary Bracket (See user manual)
• JH 15TSV STD-A1 = Sun Visor (See user manual)
• JH 15VED STD-A1 = Vesa Bracket (See user manual)
• JH 15TAP STD-A1 = 15" Adapter Frame to 19" Rack (See user manual)
• JH 15TAP STD-B1 = 15" Adapter Frame to 17" CRT cut out (See manual)
• JH 15TWC STD-A1= Water Cover (See user manual)
• Operating : Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
• IP Rating : Protection (EN60529): IP66 front - IP20 rear
• Compass Safe Dist. : JH15T17MMD-xxx-xxxx Std: 130cm Steering: 100cm
• JH 15T17 MMD-AA1-AAAA = Standard AC, Keypad controls only
• JH 15T17 MMD-DA1-AAAC = Standard DC & Capacitive Touch Screen
• JH 15T17 MMD-AA1-AOBA = Standard AC, Bonded, Potmeter Controls, Buzzer
MMD-xxx-xxBx MMD-xxx-xxAx
Buzzer-Potmeter-Keypad Keypad
For a full overview, please review our typenumber sheet found on our website:
http://www.hatteland-display.com/pdflink/ind100780-1.php
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768*
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1920 x 1200
* Recommended for optimum picture quality. (60 Hz only)
Video Signals (with Multifunction Cable):
• Interlaced NTSC and PAL/SECAM video
• Composite video
Power Supply Options:
• 115&230VAC - 50/60Hz - JH 15T17 MMD-Axx-xxxx
• 24 VDC - JH 15T17 MMD-Dxx-xxxx
Power Consumption:
Operating : 100 W (max)
• DVI-I Signal IN : 1 x 29p DVI Female (or as RGB IN with adapter)
• RGB Signal IN : 1 x 15p HD D-SUB (female)
• RGB Signal OUT : 1 x 15p HD D-SUB (female) - Clone of RGB IN**
• Multifunction : 1 x 160p D-SUB (female) - Also see table below
• USB I/O : 1 x TYPE B Conn. (female) Reserved for future use
• AC Power IN : 1 x Std IEC Inlet
• AC Power OUT : 1 x Std IEC Outlet (5A Max)
• DC Power IN : 1 x 2p D-SUB Connector (male) - Amphenol FCC17
**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the
RGB input. The output is working even if the display unit is turned off, but power cable/supply must
be connected/provided.
• Resistive* or Capacitive Touch Screen / Optical Bonding Technology*
On front bezel - Keypad control (IP66) xxx-xxAx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (up/down - push buttons)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
On front bezel - Potmeter control (IP66) xxx-xxBx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (rotary control)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
• Speaker / Buzzer
Synchronisation:
Physical Considerations:
Available Accessories:
Environmental Considerations:
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Typical Type Numbers:
Supported Signals:
Power Specifications:
T E S T I N G / A P P R O V A L S & C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) ClassNK - Nippon Kaiji Kyokai GL - Germanischer Lloyd DNV - Det Norske Veritas
ABS - American Bureau of Shipping BV - Bureau Veritas CCS - China Classification Society LRS - Lloyd’s Register of Shipping
EU RO MR - Mutual Recognition
Signal Terminals:
Factory Options:
*Note that all 15 inch with resistive touch screens can not be combined with bonding.
User Controls:
Multifunction Cable:
• Native Resolution : 1024 x 768
• Pixel Pitch (RGB) : 0.297 (H) x 0.297 (V) mm
• Response Time Standard : 8ms (typical), black to white
• Contrast Ratio Standard : 700:1 (typical)
• Light Intensity Standard : 400 cd/m² (typical)
• Viewable Angle Standard : +/- 80 deg. (Up/Down/Left/Right) (typical)
• Active Display Area : 304.1 (H) x 228.1 (V) mm
• Max Colors : 16.7 million
• High Quality TFT with LED Backlight Technology
• 15.0 inch viewable image size, Aspect Ratio 4:3
• TFT active-matrix liquid crystal panel
TFT Technology:
TFT Characteristics: