Lab.gruppen PLM 20K44 - Manual (Page 141)

136
Lake Controller Operation Manual Rev 1.5.4
Modules Menu Reference
The Analog Iso-Float & AES Termination Status screen is accessed by tapping the zoom button to the left of
this summary as shown in Figure 8-17.
Figure 8-17: Analog Iso-Float & AES Termination Summary
Software control of the Analog Iso-Float is available for Lake-enabled amplifiers, along with separate control
for the analog outputs on LM Series devices. AES Termination is available for all devices except MY8-LAKE.
The current status is identified by an orange button as shown in Figure 8-18.
Figure 8-18: LM Series Analog Iso-Float & AES Termination Status
8.2.7 Input Mix Summary and Input Mixers/Switches
Input mix summaries and switches are shown on the I/O CONFIG page as part of the interactive signal path
for each Module.
8.2.7.1 Input Mix Summary
The block diagram for each Module shows a summary of the connected inputs and associated gain settings.
The example in Figure 8-19 shows a LM Series Mesa Module.