Lab.gruppen PLM 20K44 - Manual (Page 238)

Lake Controller Operation Manual Rev 1.5.4
Designer Mode Menu Reference
233
19.3.3.5 Disable/Enable Unused Output Channels
To completely hide a levels meter/fader, set the name of fader to Unused, perform the following steps:
1. Navigate to the relevant Module LEVELS page.
2. Tap LABEL CHANNEL, then tap the mute/label button of the relevant channel.
3. Type UNUSED, and tap OK.
The meter and fader will be invisible on the software Controller, and the meter is also disabled on the front
panel of the Lake device. To enable the channel again, change the channel label to something other than
UNUSED.
19.3.3.6 Set Hide/View Only Status for All Levels Screens
This function affects all Levels screens in the current system configuration.
1. From HOME, tap USER PREFERENCES.
2. Tap GLOBAL ACCESS, then tap LEVELS HIDE or LEVELS VIEW ONLY.
The selected button is illuminated orange.
19.3.4 Additional Designer Mode Functions
19.3.4.1 Switch between Designer Mode and User Mode
To access Designer Mode, perform the following steps:
1. From HOME, tap USER PREFERENCES, then tap DESIGNER MODE.
2. Enter the password (if set), and tap OK.
To switch to User Mode, perform the following steps:
1. From HOME, tap USER PREFERENCES.
The Designer Mode button is orange when Designer Mode is active.
2. Tap DESIGNER MODE.
The Designer Mode button is now blue; Designer Mode is inactive.