Lab.gruppen PLM 20K44 - Manual (Page 40)

Lake Controller Operation Manual Rev 1.5.4
Lake Controller Tutorial
35
6. Select LABEL MODULE from the button bar.
7. Name this Module ‘My 3-Way’ using the on-screen keyboard, and tap OK.
8. Tap LABEL EXIT to return to the MODULES menu.
Figure 4-18: Labelling a Module
To label a Super Module, select it in the work area
and tap LABEL SUPERMOD.
4.3.5 I/O Config
This section assumes the use of classic routing
mode; all providing extensive I/O routing options.
The MY8-LAKE in simplified view provides a fixed
output config.
1. Tap the I/O CONFIG button to display the block diagrams of each Module in the Frame.