Lab.gruppen PLM 20K44 - Manual (Page 147)

142
Lake Controller Operation Manual Rev 1.5.4
Modules Menu Reference
Figure 8-25: AES Output Sample Rate Configuration (LM Series / MY8-LAKE)
Please refer to section 8.2.1 for further information on Digital Clock Configuration.
For all output types, the number of channels varies depending on
the options available for the selected device.
Dante Output Configuration
For Dante outputs the DANTE CONFIGURATION screen is displayed. Please refer to section 4.3.6 for
further details regarding Dante.
Disconnecting Outputs for Output Type
Tapping the DISCONNECT ALL icon will disconnect all outputs for the currently selected destination
output type. For example, if ANALOG is the currently selected output type, tapping this button will discon-
nect all analog outputs from any source they are currently connected to. A warning dialog is displayed for
confirmation on this action.
Bridge Mode Configuration (Lake-enable Amplifier only)
To activate power output channel bridge mode on a Lake-enabled amplifier, tap the blue Bridge button on
the Output Configuration page as shown in Figure 8-26. The Bridge button turns orange and the output
selectors merge to indicate bridge mode is active. To deactivate output channel bridge mode, tap the
orange Bridge button again.