Labconco XVS Ventilation Stations 4865060 User Manual
Page 14
![background image](/manuals/738612/14/background.png)
Product Service 1-800-522-7658
10
C
C
h
h
a
a
p
p
t
t
e
e
r
r
3
3
:
:
G
G
e
e
t
t
t
t
i
i
n
n
g
g
S
S
t
t
a
a
r
r
t
t
e
e
d
d
Now that the site for your XPert or XVS vented enclosure is properly
prepared, you are ready to unpack, inspect, install, and validate your system.
Read this chapter to learn how to:
• Unpack and move the enclosure.
• Set up the enclosure with the proper supporting structure and work
surface.
• Connect to an exhaust system.
• Connect the electrical supply.
• Seal the enclosure to the work surface.
• Arrange validation for the enclosure.
Depending upon which model you are installing, you may need common
plumbing and electrical installation tools in addition to 5/16", 3/8", 7/16", and
1/2" wrenches, ratchets, sockets, a nut driver set, a flat-blade screwdriver, a
Phillips screwdriver, and a carpenter level to complete the instructions in the
chapter.
Note: The enclosure models weigh between 50 to 200 lbs. each (22 to 90
kg). The shipping container allows for lifting with a mechanical lift
truck or floor jack. if you must lift the enclosure manually, follow safe-
lifting guidelines.
Do not lift by the front Air Foil
.